My wireless audio bridge had been working fine for months. One day, it just stopped working. It would connect both wired and wireless, but had 0% buffer and would not play music. So, I decided to upgrade to the new 2.1.0 driver/firmware. After the upgrade, I had the same problem. After reading all of the issues with the new firmware on the forums, I decided to flash the bridge back to the original firmware. I had no problems with the flashing, and got the "upgrade successful" message, but now I cannot connect to the bridge at all...either wired or wireless!! I get the dreaded "No available devices were found" message.
I thought I might be able to access the bridge through the IP interface, but I have no idea what the IP address may be. When I look at my router's DHCP table, I don't see the bridge. I tried resetting the brige and accessing the IP interface with the original IP address 192.168.1.254, but to no avail.
Not sure how this happened, but I'm afraid I may have turned my bridge into a brick...HELP!!
"No devices found" after reloading original firmware
Submitted by ebeauch123 on Tue, 2008-04-08 16:37.
»
- Login to post comments
I believe my response to the
I believe my response to the first guy was to try the new firmware (he had the original one loaded). The second and third cases were both bricks, if I remember correctly.
Unfortunately, that's the way your case looks as well. Please contact the place of purchase about a replacement under warranty.
Links to other posts...
Here are a few links that I read that are similar to, but not exactly like, my situation...except for the last one (Thomas), but there was no answer/reply left for him.
http://www.sondigo.com/node/377
http://www.sondigo.com/node/499
http://www.sondigo.com/node/467
Could you forward me the
Could you forward me the link? What I would suggest depends on that person's circumstances.
Bummer...
Nope--no new software/hardware has been added. How unfortunate. In reading a few other forums, I've noticed the same issue with no solutions. I did see that you were planning on emailing another poster some last ditch suggestions for a possible brick. Could you do the same for me?? I'll try anything at this point.
Hmm, doesn't sound very
Hmm, doesn't sound very promising. Have you installed any new hardware or security software on the PC recently?
"No devices found..."
First and foremost, thanks for the super-quick reply.
Yes...I reloaded the original driver as well--to no avail.
ebeauch123
Hi, When you returned to the
Hi,
When you returned to the original firmware, did you go back to the original driver as well? That's the only driver that will work with that firmware.