Where can I find the original firmware?

Submitted by kuroueie on Sat, 2008-05-31 19:16.

Hi

I switched to the new drivers/firmware to use the sirocco on my vista machine too, but now I now experience the buffering problem as moslty everyone here (slowly going empty). Tried both version 2.1 & 2.6, router G only, different channel on router, nothing help

I tried to revert (going back to original driver/firmware), but if I have the driver on the provided CD, I have no idea where I can find the original firmware.

Could you please provided me a link?

Thx

Julien

‹ fresh XP SP3 (slipstreamed) -> No Sirocco Blue Music Light, but no sound from receiver ›
»

Hi Julien, You can download

Submitted by Aaron on Mon, 2008-06-02 15:55.

Hi Julien,
You can download it at:
www.sondigo.com/productsupport/downloads/sirocco/siroccofirmware_v110.bi...

Cheers,
Aaron

»

Username & password

Submitted by PFI on Fri, 2008-06-06 09:41.

Hi,

I have installed the v110 firmware due to buffer problems. Now the web interface asks for username and password which I do not know.

Regards,
Peter

»

Hi Peter, use: user:

Submitted by Aaron on Fri, 2008-06-06 15:07.

Hi Peter, use:
user: super
pass:

»

Passord

Submitted by PFI on Sat, 2008-06-07 11:55.

Sorry, that does not work. I get the message that this is a wrong user/paasword.

What can I do now?

Regards,
Peter

»

Hi Peter, You are leaving

Submitted by Aaron on Mon, 2008-06-09 19:26.

Hi Peter,
You are leaving the password field blank, right? Try resetting the device (hold the reset button down for 10 seconds), and try again.

»

Password

Submitted by PFI on Tue, 2008-06-10 11:53.

I did a reset (pressed the reset button for >10sec), typed in "super" as user and left the password field blank.

But the same, access denied.

What can I do?

Regards,
Peter

»

Hi Peter, At this point, I'd

Submitted by Aaron on Tue, 2008-06-10 15:09.

Hi Peter,
At this point, I'd recommend re-flashing the firmware via the web interface (192.168.1.254), and trying again.

»

Re-flasing

Submitted by PFI on Tue, 2008-06-10 15:39.

How can I re-flash the firmware via the web interface when I am not able to log on the web interface due to denied access?

B.R.,
Peter

»

Hi Peter, I'm sorry, I think

Submitted by Aaron on Wed, 2008-06-11 18:30.

Hi Peter,
I'm sorry, I think I misread your original post. Please try to login through the setup wizard (rather than the web interface) to configure the device and/or flash the firmware first. The setup wizard is always the first thing you should try.

»

Device not found

Submitted by PFI on Wed, 2008-06-11 21:16.

It's also not possible to login through the setup wizard because I always get the message "Device not found". After deinstalling the driver I tried at first the 2.1.0, than the 2.6 beta and at last the 2.7 driver. But always the same "device not found".

It seems that I lost de sondigo soundbridge forever after installing the 110 firmware.

Any further idea?

Regards,
Peter

»

Hi Peter, The v.1.10

Submitted by Aaron on Thu, 2008-06-12 15:25.

Hi Peter,
The v.1.10 firmware is only compatible with the original driver (the one on the software CD). If you are on XP, uninstall the driver you are using now and install that driver. If you are on Vista, that driver will not work.

»

Still wrong password

Submitted by PFI on Fri, 2008-06-13 17:40.

Hi,

I was using Vista. But when I use another PC with Win XP and the login wizard (original driver from CD) the device is found now but I will be ask again for username/password. "Super" as user with password field blank does still not work!

Can you please double-check the correct username/Password?

Please help me!

Regards,
Peter

»

Sorry, sound bridge is working now

Submitted by PFI on Fri, 2008-06-13 17:46.

Sorry, I just used "Super" instead of "super". I can access the soundbridge now.

Many thanks!

Cheers,
Peter

»

No problem, glad that did

Submitted by Aaron on Fri, 2008-06-13 20:05.

No problem, glad that did it!
Aaron

»